Epson E8-992F, Руководство пользователя

Страница: 90 / 210

Wired Network Projection
90
e Select the
Wired LAN
menu and press [Enter].
f Assign the IP settings for your network as necessary.
• If your network assigns addresses automatically, select
IP Settings
to
set the
DHCP
setting to
On
.
• If you must set addresses manually, select
IP Settings
to set the
DHCP
setting to
Off
, and then enter the projector's
IP Address
,
Subnet Mask
, and
Gateway Address
as necessary.
• If you want to connect the projector to the network using IPv6, select
IPv6 Settings to set the IPv6 setting to On , and then set the Auto
Configuration and Use Temporary Address settings as necessary.
a
To highlight the numbers you want from the displayed keyboard,
press the arrow buttons on the remote control. To select a
highlighted number, press [Enter].
g To prevent the IP address from being displayed on the LAN standby
screen and Home screen, set the IP Address Display setting to Off .
h
When you finish selecting settings, select
Complete
and follow the on-
screen instructions to save your settings and exit the menus.
i Press the [LAN] button on the remote control.
The wired network settings complete when you see the correct IP
address on the LAN standby screen.