Related Information
&
“Placing Originals” on page 26
Maintenance
Cleaning the Flatbed Scanner Dock
To keep your Flatbed Scanner Dock in optimum condition, follow the steps below to clean it periodically.
c
Important:
❏
Never use alcohol, thinner, or corrosive solvent to clean the Flatbed Scanner Dock. These chemicals can damage
the Flatbed Scanner Dock components and the case.
❏
Be careful not to spill liquid into the scanner mechanism or electronic components. This could permanently
damage the mechanism and circuitry.
❏
Do not spray lubricants onto the Flatbed Scanner Dock.
❏
Never open the Flatbed Scanner Dock case.
1.
Press the
button to turn off the sheet feed scanner.
Note:
There is no power button on the flatbed scanner.
2.
Unplug the AC adapter, and then disconnect the USB cable that is connected to the computer from the Flatbed
Scanner Dock.
3.
Wipe off any dirt on the outer case with a soft cloth.
If the case is very dirty, dampen a soft cloth with water and wring it out thoroughly, and then wipe off any
remaining stains. Next, use a soft dry cloth to wipe the case.
User's Guide
Using the Flatbed Scanner Dock
98