Epson dreamio EMP-TW500, Руководство пользователя

Страница: 28 / 56

26
Preparation for Using Cinema Color Editor
TW500_English
Connection using a USB cable or RS-232C cable
If connecting using a USB cable, you should install Cinema Color Editor before connecting the
cable.
If using an RS-232C cable, use a cross-type cable.
Connection settings at the projector (when using a network connection)
When the projector is connected to the network, make the network settings as follows.
Press and use the configuration menus to select "Setting" - "Operation" -
"Network".
Use and to select the item to be set, and then press .
For details on this operation, refer to "Using the Configuration Menus". p.23
•
If the "Add New Hardware Wizard" starts up or a message such as "Software needed
for the USB device is not available." appears when you connect a Windows computer
and the projector using a USB cable, click [Cancel] in the wizard window or the
dialogue box. Disconnect the USB cable, install Cinema Color Editor and then
reconnect the cable.
•
Use the "COM Port" command in the "Operation" sub-menu of the "Setting" menu to
select the port that is being used for the connection. Default setting: USB
p.20
Connecting using an RS-232C cable Connecting using a USB cable
To [Control
(RS-232C)] port
To RS-232C
port
To USB port
RS-232C cable
(commercially-available)
USB cable (accessory)
To [USB] port
* If using Mac OS X or
later, connection
using an RS-232C
cable is not possible.
* Compatible with
USB1.1
TW500-E.book Page 26 Wednesday, October 29, 2003 8:52 PM