53
Appendix
Environmental Specification
∗
1: After the vibration is applied, there should be no visible defect on both the surface and inside, and have no problem for
operation.
∗
2: After the impact is applied, there should be no visible defect on both the surface and inside, and have no problem for
operation.
∗
3: After the impact is applied while the product is not operating, there should be no visible defect on both the surface and inside,
and have no problem for operation.
Temperature /
Humidity
Operating
5 to 45°C {41 to 113°F}, 10 to 90% RH, non condensing,
34.0°C {93.2°F} of wet-bulb temperature
(The blue area on the graph below shows operating environment)
Storage
-10 to 50°C {14 to 122°F}, 10 to 90% RH, non condensing,
39.0°C {102.2°F} of wet-bulb temperature
Vibration
resistance*
1
Operating
Frequency
10 to 150 Hz
Acceleration rat
Approx. 4.9 m/s
2
{0.5G}
Sweep
10 minutes (one way)
Time
1 hour
Directions
XYZ
Before
unpacking
Frequency
10 to 55 Hz
Acceleration rate
Approx. 19.6 m/s
2
{2G}
Sweep
10 minutes (one way)
Time
1 hour
Directions
XYZ
Impact
resistance
Before
unpacking*
2
Packaging specification
Epson standard packaging for factory shipment
Height
90 cm
Directions
1 corner, 3 ribs, 6 surfaces
After
unpacking*
3
Height
5 cm
Directions
4 sides, Supporting only one side
Life
Product life
5 years
LCD back light
43,800 hours or longer (the time until the brightness drops to
half in a room temperature, 25 degrees C)
Altitude
3,000 m or less
90
60
80
10
20
40
0
0
10
20
30
40
50
