Epson DFX 8000, Руководство пользователя

Страница: 81 / 346

Printing on Special Paper
The DFX-8000 can print on various types of paper, including multi-
part forms and labels. It can also handle a variety of paper
thicknesses, from thin paper to six-part forms. The printer
automatically adjusts to the thickness and width of your paper.
When you print on multi-part forms and labels, the positioning of
your text on the page can be critical. For more. information on
aligning your text, see the sections on adjusting
the
top.
of
form and
printing positions in Chapter 3. You should also check both your
printer and your software page length settings before you load
labels or forms. See
the section on
page length
in Chapter 3.
If you are using labels or preprinted or multi-part forms, you may
want to use the optional pull tractor. See Chapter
5.
WARNING:
When printing on multi-part forms or labels,
make sure that your printing stays within the printable
area of the paper to prevent damage to
the
print head.
For more information on
the
printable area, see page 8-6.
Copy mode
If the printing on the last pages of your multi-part forms is too
faint, you can use the DFX-8000’s copy mode to print clearer,
darker characters on each page. In copy mode, which is available
only for draft, not NLQ, the DFX-8000 prints at half the normal
speed.
To select or cancel copy mode, press the
FORM FEED/COPY
button
when the
ON LINE
light is on. When you select copy mode, the
printer beeps twice; when you cancel copy mode, the printer beeps
once.
Paper Handling 2-29