Epson DFX 8000, Руководство пользователя

Страница: 227 / 346

Printing
Problem Solution.
A series
of
strange
characters is being
printed.
The
printing position
is incorrect.
Printing starts too
high or too low on
the page.
The line
spacing is
incorrect.
One
of
printing
takes up two lines.
can also set a DIP switch to cancel
condensed mode. To do this, turn off the
printer, turn off DIP switch l-l, and then
turn on the printer. See page 3-46.
Your printer and computer may not be
communicating correctly. Make sure that
you are using the correct interface cable,
that the communication protocol is correct,
and that the interface cable is securely
plugged in. See pages 3-13 and g-11. See
your computer manual for more
information.
The top of form position may be incorrect.
Adjust the top of form position
as
described
on page 3-33. If the problem persists, check
your software program’s top margin setting
and change it if necessary.
If your application program can send
control codes, set the line spacing using
or A.
See pages 9-15, 9-16, and 9-17.
The margins may not be set correctly. If
your application program can send control
codes, set the left and right margins using
ESC 1 or ESC Q. See pages 9-19 and 9-20.
Troubleshooting 7-9