Epson C117001-N - DFX 5000+ B/W Dot-matrix Printer, Руководство пользователя

Страница: 143 / 229

l
Make sure that all protective materials are removed. If not,
turn off the printer, remove the protective materials, and turn
the printer back on. See the section on removing protective
materials in Chapter 1.
If the printer still does not print, disconnect the printer from the
computer and try the self test described in Chapter 1. If the self
test works properly, the printer is working and the problem
probably lies in the computer, the software, or the cable. If the self
test does not work, contact your Epson dealer.
The printer stops printing
The printer may be out of paper. Check the paper supply.
The paper may be jammed. Remove the jammed paper and
reload. See the sections on loading paper in Chapter 2.
The ribbon may be jammed. This problem is usually caused by
too much slack or a worn ribbon. See the section on replacing
the ribbon in Chapter 5.
The top cover may be open. If the top cover is opened during
printing, the printer beeps four times and stops printing. To
resume printing, close the top cover and press the ON LINE
button.
If the
ON LINE
light is flashing, the print head is overheated.
Wait several minutes until the print head cools. Printing
resumes when the head cools.
If the printer stops and the beeper sounds, turn the printer off
and check for paper jams or other problems. Then turn it back
on and try to print again. If the printer beeps again and does
not print, take it to a qualified service person.
Troubleshooting 7-3