Epson Aculaser C1600 Скачать руководство пользователя страница 83

Страница: 83 / 93

Symptom

Cause

Solution

With N-up on
multiple prints,
the output is
incorrect.

Both the driver and the
application have been set for
collation.

For N-up on multiple prints, choose Collate only in the
driver’s Basic Tab. Do not set collation in the application.

You hear unusual
noises.

The printer is not level.

Put the printer on a flat, hard, level surface.

There is a foreign object stuck
inside the printer.

Turn off the printer and remove the object. If you cannot
remove it, contact Technical Support.

Media is wrinkled.

The media is moist from
humidity or having water spilled
on it.

Remove the moist media and replace it with new, dry media.

The media feed roller or fuser
unit is defective.

Check them for damage. If necessary, contact Technical
Support with the error information.

Unsupported media (wrong
size, thickness, type, etc.) is
being used.

Use Epson-approved media. See “Print Media” on page 25.

You do not know
the procedure for
returning the
settings on the
Panel tab of the
Remote Panel
Program to their
defaults.

Exit the Remote Panel Program with the icon in the Windows
notification area (right end of taskbar), and then start up the
utility again.

Since the default settings appear when the utility is started
up again, click the

Apply

button. For details on exiting the

Remote Panel Program, refer to “Closing the Remote Panel
Program” on page 24.

You do not know
the procedure for
returning the
settings on the
User Service tab of
the Remote Panel
Program to their
defaults.

Exit the Remote Panel Program with the icon in the Windows
notification area (right end of taskbar), and then start up the
utility again.

Since the default settings appear when the utility is started
up again, click the

Upload

button. For details on exiting the

Remote Panel Program, refer to “Closing the Remote Panel
Program” on page 24.

AcuLaser C1600 User’s Guide

Troubleshooting

Содержание Aculaser C1600






























































































Результаты поиска

Содержание Aculaser C1600

Отзывы:

Похожие инструкции для Aculaser C1600

Бренды по названию

Популярные бренды

Epson Aculaser C1600, Руководство пользователя

Результаты поиска

Содержание Aculaser C1600

Отзывы:

Похожие инструкции для Aculaser C1600

Бренды по названию

Популярные бренды