Character Tables
These character tables are selected with the default setting mode or by
using a software command. All the tables are the same for hex codes 00
through 7F. Therefore, only first table is shown completely. The rest of the
tables show only the characters for hex codes 80 through FF.
For all character tables except the italic character table, the ESC 6 and
ESC 7 software commands
let you select whether hex codes 80 to 9F are
characters (ESC 6) or control codes (ESC 7).
The tables with an * after the table name are available in the European
version only.
PC 437 (USA, standard Europe)
Appendix A-23
Содержание ActionPrinter 3260 s
Страница 1: ......