background image

148

Notices

a)

Accompany it with the complete corresponding machine-readable source 
code, which must be distributed under the terms of Sections 1 and 2 above 
on a medium customarily used for software interchange; or,

b)

Accompany it with a written offer, valid for at least three years, to give any 
third party, for a charge no more than your cost of physically performing 
source distribution, a complete machine-readable copy of the 
corresponding source code, to be distributed under the terms of Sections 1 
and 2 above on a medium customarily used for software interchange; or,

c)

Accompany it with the information you received as to the offer to distribute 
corresponding source code.  (This alternative is allowed only for 
noncommercial distribution and only if you received the program in object 
code or executable form with such an offer, in accord with Subsection b 
above.)

The source code for a work means the preferred form of the work for making 
modifications to it.  For an executable work, complete source code means all the 
source code for all modules it contains, plus any associated interface definition 
files, plus the scripts used to control compilation and installation of the 
executable.  However, as a special exception, the source code distributed need 
not include anything that is normally distributed (in either source or binary form) 
with the major components (compiler, kernel, and so on) of the operating 
system on which the executable runs, unless that component itself 
accompanies the executable.

If distribution of executable or object code is made by offering access to copy 
from a designated place, then offering equivalent access to copy the source 
code from the same place counts as distribution of the source code, even 
though third parties are not compelled to copy the source along with the object 
code.

4.

You may not copy, modify, sublicense, or distribute the Program except as 
expressly provided under this License.  Any attempt otherwise to copy, modify, 
sublicense or distribute the Program is void, and will automatically terminate 
your rights under this License. However, parties who have received copies, or 
rights, from you under this License will not have their licenses terminated so 
long as such parties remain in full compliance.

5.

You are not required to accept this License, since you have not signed it.  
However, nothing else grants you permission to modify or distribute the 
Program or its derivative works.  These actions are prohibited by law if you do 
not accept this License.  Therefore, by modifying or distributing the Program (or 
any work based on the Program), you indicate your acceptance of this License to 
do so, and all its terms and conditions for copying, distributing or modifying the 
Program or works based on it.

6.

Each time you redistribute the Program (or any work based on the Program), the 
recipient automatically receives a license from the original licensor to copy, 
distribute or modify the Program subject to these terms and conditions.  You 
may not impose any further restrictions on the recipients' exercise of the rights 
granted herein. You are not responsible for enforcing compliance by third parties 
to this License.

Содержание 826W - PowerLite WXGA LCD Projector
















































































































































































Отзывы: