Epson 7800p - PowerLite XGA LCD Projector, Руководство пользователя

Страница: 37 / 146

Displaying and Adjusting the Image
29
4. Press the red
P
Power
button on top of the projector—or press
the
P
Power
button on the remote control.
(If this is your first time using the remote control, make sure the
batteries are installed and the on/off switch on the side of the
remote is turned on; see page 46.)
The
P
power light flashes green as the projector warms up, and an
image begins to appear. When the
P
power light stops flashing
and remains green (in about 40 seconds) the projector is ready
for use.
5. If you’ve connected a Windows-based computer to the projector,
you may see a New Hardware Wizard saying your computer has
found a plug-and-play monitor; if so, click
Cancel
.
Turn on
remote
Power button
warning
Never look into the lens
when the lamp is on. This
can damage your eyes, and is
especially dangerous for
children.