Epson 410W - PowerLite WXGA LCD Projector, Руководство пользователя

Страница: 59 / 118

Fine-tuning the Projector
59
3. Press
Enter
. Then use the up and down arrow buttons and the
Enter
button to set the following options:
■ Auto Setup
(computer images)
Leave this setting
On
to automatically optimize the computer
image. Turn it off if you want to save adjustments you have
made to the video settings.
■ Resolution
(computer images)
Set to
Auto
to have the projector automatically identify the
resolution of the input signal. If necessary, select
Wide
(for
widescreen images) or
Normal
(for 4:3 ratio images).
■ Tracking
(computer images)
Removes unwanted vertical lines from a computer image by
matching the projector’s internal clock to various computer
signals. See page 88 for more information.
■ Sync
(computer images)
Corrects fuzziness or screen flicker by synchronizing the
projector with the tracking signal sent from the computer.
See page 88 for more information.
■ Position
Use the arrow buttons to move the image on the screen left,
right, up, or down.
■ Progressive
(video images)
Leave this setting
On
when viewing S-Video or composite
video so that interlaced-to-progressive conversion is carried
out (best for fast-moving pictures). If you notice flickering
while viewing still images, or you are using a component with
a 480i signal, switch this setting to
Off
.
■ Computer Input
(
1
or
2
)
Selects the signal from equipment connected to the
Computer1
or
Computer2
ports. If your image colors look
wrong, try changing this setting from
Auto
to one of the
following:
RGB
for computer or RGB video sources, or
Component
for component video sources.
note
If you have repositioned the
image but then change your
mind, you can press the
Enter/Auto
button on the
remote control to restore the
default settings.