Cut-Sheet Feeder
CAUTION:
Do not use envelopes multi-part forms,
carbon paper, or labels in the single-bin cut-sheet feeder.
5.
6.
7.
8.
Insert up to 50 sheets of paper along the left paper guide.
Adjust the position of
the
right paper guide
so that it matches
your paper’s width. Make sure the position of the guide allows
the paper to move up and down freely.
Push
the paper-set levers back to clamp
the
paper against the
guide rollers.
Attach
the
stacker-support wires to the edge guides of the
paper guide. Then place
the
notches on the paper guide straight
down
over the mounting posts on the printer to reinstall it.
Slide the edge guides to the middle of your paper.
You can still insert single sheets using the rear paper guide or the
front paper slot. The cut-sheet feeder automatically loads paper
when
you send print data to
the
printer (as long as the
PAUSE
light
is not lit). You can also load paper from the cut-sheet feeder by
pressing the
LOAD/EJECT
button.
Using the Printer Options
4-5
