Epson 1000 ICS, Основное руководство

Страница: 31 / 65

26
Aligning the Print Head
3. When the
P
Operate
light stops flashing, run a nozzle check to confirm the print
head nozzles are clean: make sure paper is loaded in the EPSON 1000 ICS and
press the left Menu button several times until you see
Nozzle Check
, and then
press the
x
Copy
button. The nozzle check pattern prints.
4. Examine the nozzle check pattern you print. It should look something like this:
Each staggered horizontal and straight vertical line should be complete, with no
gaps in the dot pattern. If your printout looks okay, you’re done.
5. If you see any white lines or gaps, clean the print head again.
If you don’t see any improvement after cleaning three or four times, check the
solutions beginning on page 39. You can also turn the EPSON 1000 ICS off and
wait overnight—this allows any dried ink to soften—and then try cleaning the
print head again.
Aligning the Print Head
If your printouts contain misaligned vertical lines, you may need to align the print
head. You can align the print head directly from the EPSON 1000 ICS control panel.
Load plain paper that’s at least 8.27 inches (210 mm) wide to prevent ink
from spraying inside the EPSON 1000 ICS and smudging your printouts.
1. Make sure the EPSON 1000 ICS is turned on and plain letter-size paper is
loaded.