Epsolar ET2415N, Инструкция по эксплуатации

Страница: 11 / 64

Page
6
1 – Heat Sink
Inductance and MOSFET of heat through aluminum heat sink to dissipate.
2 – LCD
Data of displaying interface.
3 – Battery Indicator
An LED indicator shows battery status.
4 – Charging Indicator
An LED indicator shows charging or not.
5 – Faults Indicator
An LED indicator shows controller faults.
6 – Buttons
Browse or modify all parameters.
7 – Serial RS-232 Port (DB9)
Monitor controller by PC or update software.
8 – Ethernet Port (RJ45)
Connect Ethernet, monitor controller remotely by network.
9 – Solar polarity reversed Indicator
An LED indicator shows solar modules positive and negative reversed.
10 – Remote Temperature Sensor Port (MC1.5.3.81-2L)
Connect RTS, Measure battery temperature to make temperature compensation.
11 – Remote Battery Voltage Sense Port (MC1.5.3.81-2L)
Connect RBVS, Measure battery voltage accurately.
12 – CAN BUS Port (MC1.5.3.81-4L)
Communicate with our other CAN BUS devices.
13 – Solar Positive Terminal (red)
Connect to solar module(s) positive (+) terminal.
14 – Solar Negative Terminal (black)
Connect to solar module(s) negative (-) terminal.
15 – Battery Negative Terminal (black)
Connect to battery negative (-) terminal.