Epsolar ET2415N, Инструкция по эксплуатации

Страница: 33 / 64

Page
28
After correct password input, inverse cursor appears,
and you can modify selected para. Press or
to change it, press or to select to change
parameter of other interfaces, press to confirm
to save, or press to exit setting. 2 kinds of
network type are available with left interface, which
are automatic distribution and manual distribution,
and it is manual distribution by default. Network
password is used to login Web monitoring page.
This interface will pop out if you input correct
password and press to save, and the controller
will run with new parameters.
Press or to change value, press or
to move inverse cursor. Network port (TCP/IP port)
usually set for default „80‟; MAC address set for 12
bits of the hexadecimal encoding (0~F), note that in
the same network, each equipment should be set for
unique MAC address different from others, otherwise
communication error will occur.
Press or to change value, press or
to move inverse cursor. IP address usually set for
„192.168.000.XXX‟; Subnet Mask usually set for
default „255.255.255.000‟.
Press or to change value, press or
to move inverse cursor. Default Gateway usually set
for „192.168.000.001‟.
Tip Message
Modify OK
OK
Network Type
Manual
Network Psw
000000
↓
ESC
+
_
↑
OK
IP Add.
192.168.000.002
Subnet Mask
255.255.255.000
Default Gateway
192.168.000.001
+
_
↓ ↑
Network Port
0080
MAC Add.
000000000000
+
_
↓ ↑
+
_
↓ ↑