SK202 User manual
Figure 2.
P
The Network PHY chip embed
is able to support 10/100/1000M
communicate they must operat
connector of blinks when a 1G
and the distant PHY. The Oran
The PHYs on the SK2
automatically with the device i
place in parallel.
As a consequence, if the t
different maximum speeds, the t
Figure 3.
For the SK202 commu
advertising different maxim
fastest device has to be contro
2
of
6
Physical picture of SK202 non-contact connector
dded in the SK202 is set in Auto-negotiation m
Mbps. In order for the SK202A and SK202B
te at the same speed. The Green LED on the R
Gbps communication is established between th
nge LEDs blinks when the communication is a
K202 work independently and each one
it is connected to. So two independent negoti
two devices, such as a laptop and a camera,
e two auto-negotiation results will differ.
Non controlled auto-negotiation may fail
mmunication to establish correctly betwee
mum speed capabilities, the auto-negotiati
olled.
mode and
to
RJ45
he local
at 10Mbps
negotiates
iations take
a, advertise
n devices
ion of the
