SK202 User manual
This document guides use
modules transmits Gigabit Eth
contactless way. SK202 opens
module integrates a network
transceiver chip, which can be
network cable. Please note is t
as described in section 3 of this
Figure 1.
Sche
SK202 only needs to be con
be noted that the network negoti
same. If the PC side is a gigabi
SK202A will be 1G. Then the r
will automatically negotiate the
be connected, working on Giga
Assuming that the router has a
with the router. At this time, th
are inconsistent, and the netwo
Auto-negotiation below.
The category of the cables u
must be compatible with the ra
note that SK202A and SK202B
needs to be aligned with a dista
1
of
6
ers how to use the SK202A/B modules. T
thernet signals at a distance of several centim
a new scene for network connection applica
PHY chip and ST60 A2, a millimeter wav
e simply connected to the existing Ethernet r
that both SK202 modules must at the same sp
s document.
ematic diagram of using SK202 to connect IP camera
onnected to the network and power supply, but
otiation rate of the PC side and the router side a
it network, the rate automatically negotiated w
rate on the router side must be 1Gbps, and the
e rate with the SK202B to be 1Gbps. The netw
abit Ethernet.
rate of 100M, SK202B will negotiate a rate o
he rate of SK202A is 1Gbps, and the rates of S
work will not work. Please refer to section Cont
used to connect the modules to the rest of the
ate that will be negotiated. 10/100 or 1000Mbp
B must be used in pairs, and the golden antenn
ance of about 3cm.
The pair of
meters in a
cations. This
ve wireless
replacing a
peed mode
t it should
e are the
with the
e router
work will
of 100M
SK202A/B
ntrolled
the network
bps.Please
na part
