9
POWER
BOOST
by EPS Group
Starting up: Steadypres
Switch on power to controller
and wait the STARTING time
(approx. 10 sec.)
By pressing
START STOP
you
put the inverter IN
SERVICE
or OUT OF SERVICE
.
To increase 0.1 bar press
SIMULTANEOUSLY
To decrease 0.1 bar press
SIMULTANEOUSLY
ENTER
ENTER
P 3.2
P 3.3
P 3.1
Set pressure quick adjustment: Steadypres
Light Signals: Steadypres
Keyboard
ON
OFF
BLINKING
STATUS
POWER
STEADYPRES does not detect power supply.
WARNING
:
cannot
guarantee the absence of power supply, the electronic board
may be faulty, but under tension
STATUS
POWER
STEADYPRES is live, but the pump is not running (STANDBY)
STATUS
POWER
STEADYPRES is live, and the pump is running
STATUS
POWER
STEADYPRES is live, but out of serivce; the re-arm is only manual
STATUS
POWER
is only manual STEADYPRES is in ALARM mode, re-arm
Controller Specifi c Instructions & Troubleshooting
+
+
