CDMA FWT SXT-2180
11
Technical Manual
SXT-4080 TECHNICIAN PROGRAMMING
Technician Programming Commands
CDMA WIRELESS LOCAL LOOP 1X TERMINAL SERVICE MANUAL (SXT-4080)
I.
Entering service mode(NAM mode)
1.
Pick up the handset.
2.
Press “*748#96*75259#”, then you can hear a confirmation tone.
3.
Press “000000”(security code), then you can hear a confirmation tone.
Now, you are in a service mode.
Current state is the
main state
.
If you press wrong code, you can hear an alert tone.
And then you will be in idle state.
If you enter the service mode again, start again from ‘1’.
*Note:
If a user wants to go out the service mode while he is in a main state, press “**” or take down the
handset. Then the terminal will be reset. You can see the read-only data and changed data via Virtual LCD.
II.
Quick Reference Table for Technician Programming.
CATEGORY ITEM SHOTKEY
FUNCTION
General (
01
)
ESN(01)
(Electronic Serial Number)
“
01
01”
Read Only
Press
À
or #, then Confirmation
tone is heard. Go to main state.
CAI Ver(02)
(Common Air Interface)
“
01
02”
Read Only
Press
À
or #, then Confirmation
tone is heard. Go to main state.
VoiceSO(03)
WILDCARD(01)
“
01
0301”
Press
À
: go to main state after
save.
Press #: go to main state.
EVRC(02)
(Enhanced Variable Rate
Codec)
“
01
0302”
Press
À
: go to main state after
save.
Press #: go to main state.
SCM(04)
(Station Control Mark)
“
01
04”
Edit as “0”,”1”
Press
À
: go to main state after
save.
Press #: go to main state.
LOCK CODE(05)
“
01
05”
Read Only
Press
À
or #, then Confirmation
tone is heard. Go to main state.
SLOT MODE(06)
“
01
06”
Press
À
: Slot mode.
Go to main.
Press # :None Slot mode. Go to
main
SLOT CYCLE INDEX(07)
“
01
07”
Set slot cycle index when the
SXT800 is in slot mode.
Edit as “0”~”1”
Press
À
: go to main state after
save.
Press # : go to main state.
RC(08)
(Radio Configuration)
“
01
08”
Edit as “1”~”5”
Press
À
: go to main state after
save.
Press # : go to main state.
SPC CHANG(09)
“
01
09”
Press
À
: enable
go to main state.
Press # : disable