page | 13
To set POWER MODE to Audio Sense:
1.
Using the browser user interface, set
POWER MODE
to
Audio Sense
.
Note:
In this mode, the amplifier can be turned on when audio is sensed or when an IP/IR command is
received. Front-panel power button presses are ignored. The amplifier automatically goes into Standby if no
audio is sensed for 15 minutes (default). However, this time setting can be changed or Standby mode can
be disabled. If Standby is disabled, the amplifier turns off only when an IP or IR power command is received.
See “Standby Settings” below for more information.
Note:
The Standby wakeup time varies based on the selected Power Mode and amplifier model. See the
Specifications section at the end of this guide for details.
STANDBY SETTINGS
This setting determines the time it takes for the amplifier to go into Standby after no audio has been sensed.
To set Standby mode:
1.
Using the browser user interface, set
Standby
to one of four options:
15 minutes
,
1 hour
,
3 hours
, or
Never
.
Selecting
Never
disables Standby, ensuring that the amplifier remains on until an IP or IR power command is
received.
