www.snapav.com Support 866.838.5052
page | 6
Wall Mount Installation
• Remove the four feet from the bottom of the chassis, if needed.
• Attach the included rack-mount ears to the sides of the amplifier chassis.
• Securely mount the amplifier into a mounting box.
• It is always wise to leave ventilation between components even though the
amplifier produces very little heat.
Vertical Mounting (Walls or Enclosures)
• The amplifier may be mounted on any surface using fasteners (not included)
suited for the surface material.
• The included module mounting pins may be used to secure the amplifier
inside structured wiring enclosures.
• The rubber feet (included) can be attached to dampen vibrations if needed.
Horizontal Placement
• The rubber feet (included) can be used for shelf placement of the amplifier.
• Using these will prevent vibration and movement of the amplifier. Attach one
to each corner of the unit.
WARNING:
Do not stack anything on top of the amplifier
CONNECT
CAUTION:
All connections and switching must be done with the amplifier
turned off. Connect the power cord last to ensure that the amplifier is off during all
the connections and set up.
!
