© 2019 Episode®
page | 11
TROUBLESHOOTING
Episode amplifiers are designed to function trouble-free. Most problems
that occur are due to simple issues. If having trouble, check the list of simple
fixes below. If the problem persists, contact Episode technical support at
866-838-5052.
No audio output
• Power cable to the amplifier is incorrectly
connected or plugged into an outlet that does
not have power. Check connections and verify
power at the outlet.
• Audio cable to the source component is not
connected properly, connection to output or the
cable is defective. Check connections or replace
cable with one that has been verified as good.
• Amplifier is in standby mode and needs to be
turned on (blue LED).
• Check the connections of the speaker wire at
both the speaker and amplifier.
• The level adjustment is turned down. Slowly
turn the dial to the right to raise the volume.
Hum or buzzing
sound is heard
• Check RCA input cables by removing them one
at a time (powering down the amplifier before
disconnecting) and verify connections.
Amplifier will
not turn on
• Ensure the amplifier is plugged into a live outlet.
• The power mode may be set to the wrong mode
for the system’s configuration or setup.
