page | 5
© 2015 Episode®
F. POWER CONTROL:
FRONT PANEL/12V TRIGGER/AUDIO SENSE
Sets the power on state.
FRONT PANEL:
Always on. Amplifier does not turn off automatically.
Turn unti ON/OFF using the front panel power button.
12V TRIGGER:
Amplifier turns on when 12V signal is detected
and off when 12V signal is absent.
AUDIO SENSE:
Audio Sense enabled. Amplifier turns on when audio signal is detected. Unit enters standby
mode if no signal is detected after 15 minutes.
DEFAULT:
FRONT PANEL
G. IR DEVICE ID:
1/2/3/4
Assigns an IR ID for each amplifier appearing in a system set up.
Refer to the support tab of the product page to download the
Control Protocol.
DEFAULT:
1
H. LOCK CONTROLS:
ON/OFF
Locks the controls to prevent accidental changes in settings. Press
and hold knob for 10 seconds to unlock.
ON:
Locks controls
OFF:
Allows adjustment of settings
DEFAULT:
OFF
I. FACTORY RESET
Resets all functions to default settings. Push the knob to enter the
reset menu, turn the knob once to select firmware reset, then push
once more to reset to factory settings.
NOTE:
Firmware version is displayed on screen when selected.
J. MENU EXIT SCREEN
Press the selection knob to exit to the main menu screen, or turn
the selector knob to scroll to the beginning of the sub menu. The
selector knob will advance the sub menu continuously in both
directions until the knob is pressed to exit once returning to the
“Menu Exit” screen.
NOTE:
The volume level can be adjusted immediately once exiting the sub menu to the main menu.
FR O NT P A N E L
P OWE R C O N T R O L
1
I R
I D
D E V I C E
O F F
l O c k
O
c N T R O L S
O F V 1 . 0 3 R E S E T
FA c T
Y
R
O
R E S E T
P R E SS
E X I T
E X I T
T O
ME N U
© 2015 Episode®
