![background image](http://html.mh-extra.com/html/epiphan/kvm2ethernet/kvm2ethernet_installation-manual_2417791006.webp)
Installation and getting started
VGA2Ethernet software features
Page 6
VGA2Ethernet
Note:
The VGA2Ethernet device will not capture images until a
video capture workstation has found the VGA2Ethernet device
on the network and an application is requesting captured images.
Even if the VGA2Ethernet device is properly connected to a VGA
source the red LED will not flash unless a video capture
workstation is receiving captured images.
VGA2Ethernet software features
Use the following software features to install the VGA2Ethernet
device on your network.
Default IP
address and
network mask
IP:
192.168.255.250
Netmask:
255.255.255.252
VGA2Ethernet
drivers and
application
Download the VGA2Ethernet drivers and
application from the VGA2Ethernet download
page to install the VGA2Ethernet user
interface and NetworkDiscovery tool on a
video capture workstation running Windows
2000, Windows XP, or Windows Vista. You
can use the NetworkDiscovery Utility to find
the VGA2Ethernet on your network and you
can use the VGA2Ethernet user interface to
receive and process captured images from the
VGA2Ethernet device.
See
“Installing VGA2Ethernet drivers and
application” on page 12
.