![background image](http://html.mh-extra.com/html/epiphan/kvm2ethernet/kvm2ethernet_installation-manual_2417791014.webp)
Installation and getting started
Installing VGA2Ethernet drivers and application
Page 14
VGA2Ethernet
5
On the video capture workstation, run the VGA2Ethernet user
interface. From the Windows Start menu select
Start >
Epiphan VGA2Ethernet > VGA2Ethernet GUI
.
The VGA2Ethernet user interface starts up and looks for
VGA2Ethernet devices on your network.
If the VGA2Ethernet device is operating, has received an IP
address from a DHCP server, and is connected to your network,
the VGA2Ethernet user interface should find it and the image
being captured by the VGA2Ethernet device should appear on
the VGA2Ethernet user interface display.
If the VGA2Ethernet device is not capturing images the device
name and serial number still appear in the title bar and the IP
address of the device still appears in the status bar but instead of
a captured image, the VGA2Ethernet user interface displays
No
signal detected
.
Figure 10
shows the VGA2Ethernet connected to a VGA2Ethernet
device at IP address 192.168.20.21.
Figure 10:Example VGA2Ethernet user interface display
Title Bar
Toolbar
Captured
Image
Status Bar
Menu