www.epicactioncam.com
9
DOWNLOADING
There are two simple ways to download your video to your personal
computer.
USB Connection
MSDC mode: When EPIC is powered OFF, connect the camera to
PC/Mac via USB cable; the camera will go into MSDC mode for the
PC/Mac to access the captured video from the SD memory card inside
the camera, and the Green LED will blinking.
Your computer should recognize the EPIC as a USB mass storage
device. Simply drag & drop the videos to the desired destination folder
on your computer.
Note to MAC users: iPhoto™ will launch when the EPIC is plugged in.
You may download the video directly into iPhoto™.
Card Reader
Another option for downloading is to remove the SD memory card from
the camera and insert into a USB SD card reader.
Your computer should recognize the SD memory card as a USB mass
storage device. Simply drag & drop the videos to the desired
destination folder on your computer.
www.epicactioncam.com
10
VIEWING LIVE VIDEO
The TV out is only for NTSC TV system. NTSC - is the analog
television encoding system used in most of the Americas.
TV LIVE MODE
Power ON the EPIC, connect the camera to the TV via an AV cable
(sold separately). The camera will automatically enter TV Live mode to
display live viewing on TV.
EPIC VIEWER – (SOLD SEPARATELY)
The new EPIC viewer will allow you to both view live video or playback
videos right in the palm of your hand likes TV live mode.
For more information on the EPIC Viewer, please visit our website at
www.epicactioncam.com.
PLAYBACK VIEWING MODE
The EPIC allows you to playback either the videos and displays them
onto your TV or optional EPIC Viewer.
1. Power OFF the EPIC, connects the camera to the TV via an AV
Cable (sold separately). Then power ON the camera to enter
playback mode and the Green indicator will light up.
2. Press (S) button to play or press (S) button once to pause. Your
EPIC camera will play all the videos one by one automatically.
www.epicactioncam.com
11
MOUNTING OPTIONS
The EPIC’s ultra lightweight and compact size makes it ideal for all
kinds of action. We have provided you with some basic mounts to help
get you started.
All the EPIC mounting accessories utilize a quick clip device that allows
the camera to be easily changed between mounting accessories.
Depending on the kit you purchased, your EPIC may or may not
include the following mounts.
Strap Mount – perfect for mounting to helmets with vents, wear on
your wrist or just about anywhere you can think of, strap on the EPIC
and catch all the action.
Waterproof Housing – while EPIC is splash resistant, the Waterproof
case is a must for any dirt or water applications. This housing makes
the EPIC completely waterproof down to 20 feet.
Clip Mount – easily clip to the brim of a hat or the visor of your vehicle.
Bar Mount – whether it’s the cross bars of your ATV, or the handle
bars of your mountain bike, this tube mount will accommodate bars
between ½” to 2” in diameter.
Tree Screw – while high in a tree stand or low in a blind, simply screw
into any tree branch or trunk at the desired height to capture your line
of view.
www.epicactioncam.com
12
Shock resistant saddle – want a little extra padding or just don’t want
to use any of the provided mounting accessories? This dense foam pad
used with a simple strap will help you mount the EPIC and absorb
vibrations.
Elbow Joint – With three adjustable wheel hinges, you can capture
almost any point of view angle without any obstruction.
Suction cup – Heavy duty RAM Suction Cup design offers a secure
lock mount for contoured or flat surfaces such as Moto helmets and
fuel tanks.
Curve mount – Permanent 3M
TM
VHB
TM
adhesive labels adhere to the
underside base of our universal quick clip. Ideal for helmets of any size
or material finish.
Surface Preparation for Curve Mount:
1. Use rubbing alcohol to clean the mounting surface.
2. Wipe dry the surface.
3. Remove adhesive protective label.
4. Apply your mount to surface.
5. Press and hold for sixty seconds to allow adhesive to bond to
the surface.
6. Bond strength will increase through time. At room temperature,
wait for at least 24 hours to achieve 90% bonding strength, and
72 hours for 100% bonding strength.
