www.epicactioncam.com
5
Figure 1.1
Figure 1.2
INSTALLING BATTERIES - Camera
1. Open the USB/TV/SD door located at the rear of the camera.
2. Push the BATTERY door down and outward. (Figure 2.1)
3. Insert batteries, then close the battery door first then close top door
second. (Figure 2.2)
Figure 2.1
Figure 2.2
Helpful tip on batteries: To extend your recording time, EPIC highly
recommends Energizer™ Lithium batteries for optimum performance.
www.epicactioncam.com
6
INSTALLING BATTERIES – Remote Controller
1. Push the battery lock tab inward and slide out the battery tray as
show (Figure 3.1)
2. Insert battery, then close the battery tray. Make sure it’s pushed all
the way in and the battery lock tab is in place.
Figure 3.1
NOTE: The battery for Remote Controller is CR2032.
LED COLOR INDICATOR – ON CAMERA
Green: Power ON / Pause
Green : Start & Sop Recording
Green Blinking: USB connected.
Red: Battery Low
Yellow: Memory Full.
Yellow Blinking: Firmware upload
Front Blue: Recording
www.epicactioncam.com
7
“HOW TO” - INSTRUCTIONS
POWER ON/OFF
To turn the EPIC ON, press and hold the (S) button for 2 seconds.
To turn the EPIC OFF, press and hold the (S) button for 2 seconds.
NOTE: After the camera is turned off, you will need to wait 5 seconds
before turning the EPIC back on.
SHOOT A VIDEO
1. Turn on the EPIC by pressing and hold the (S) button for 2 seconds.
2. Press (S) to start recording a video.
•
During video recording, the blue LED on the front bezel as well
as the Green LED on the top of the camera housing will light up.
3. Press (S) again to stop recording.
•
Blue LED will turn off while the Green LED on the top of the
camera housing will remain on to indicate it’s in a paused mode.
Note: Due to limitations within Microsoft’s Operating System, a file size
cannot exceed 3.8GB. When you have reached the file size limit your
Camera WILL automatically pause to store the file and create a new
file to continue the recording until you stop by pressing the (S) button.
Depending on the file size and recording length, the system will still
store your file based on 3.8GB per file size limit so you may have
multiple files per one recording session.
www.epicactioncam.com
8
SHOOT A VIDEO by EPIC Remote Controller
1. After turn on the EPIC camera.
2. Press (S) from remote controller to start recording a video.
•
During video recording, the blue LED on the front bezel as well
as the Green LED on the top of the camera housing will light up.
3. Press (S) from remote controller again to stop recording.
•
Blue LED will turn off while the Green LED on the top of the
camera housing will remain on to indicate it’s in a paused mode.
Battery Low
Your EPIC camera built in the battery low detector, and the Status
Indicator will display the battery status.
Once batteries low detection is active, the Green indicator will change
to RED, and stop the video recording, then after 30 seconds, the
camera will turn off automatically. Please replace the batteries
