Epic Fitness El 1200 COMMERCIAL PRO, Руководство пользователя

Страница: 5 / 28

5
ASSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included hex keys and your own Phillips screwdriver , adjustable
wrench , rubber mallet , and wire cutters .
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number
following the parentheses is the quantity needed for assembly.
Note: Some small parts may have been pre-
assembled. If a part is not in the parts bag, check to see if it has been preassembled.
#8 x 3/4"
Screw (78)–10
#8 x 1/2"
Screw (91)–6
3/8" x 2 1/2" Button
Bolt (90)–4
3/8" x 1" Patch
Screw (81)–2
3/8" Washer
(84)–4
#10 x 1/2"
Screw (79)–12
#10 Fender
Washer (80)–12
Wave Washer
(95)–4
5/16" x 2 1/2" Button
Screw (88)–8
3/8" x 3/4" Patch
Screw (104)–2