Epever TP10K, Руководство пользователя

Страница: 16 / 40

13
Wiring order:
❶
Ground
——
❷
Battery
——
❸
Utility
——
❹
AC loads
WARNING
Never connect the utility to the inverter output; otherwise, the inverter may be damaged.

Grounding
The voltage of the whole system exceeds the safety voltage level. Thus reliable grounding is needed.
The grounding wire shall be the thicker wire no less than 35mm
2
) and shall be as short as possible. The
grounding point shall be as close as possible to the inverter.
CAUTION
When wiring, follow the order
❶❷❸❹
to connect the cables to the equipment, then
follow the order
❶❷❸❹
to connect ground, battery, utility, and load.
WARNING

Make sure all the wiring connections are reliable; otherwise, massive heat would
accumulate at the connection points to damage the terminals or even cause a fire.

Danger, high voltage! Terminals of the Utility input, AC output, and DC input produce high
voltage, do not close the breakers during wiring, and ensure each component's correct
polarity.
Step5: Connect accessories

Mobile APP For Android only)
Download software: www.epever.com --EPEVER (TP)
Communication cable: M12-6-male pin + crystal head-1000mm-v1.0
Modules: EPEVER WiFi 2.4G RJ45 A and EPEVER BLE RJ45 A

PC Software
Download software: www.epever.com --Inverter Monitor (TP)
Communication cable: 1. M12-6-male pin + crystal head-1000mm-v1.0
2. RJ45 Coupler
3. CC-USB-RS485-0.3mm2-3m-V1.1
Step6: Double-check the reliability of wiring connections.
Step7: Put on the cover plate.
Indicator: Inverter indicator on solid
LCD:
Step8: Close the bypass circuit breaker