Epever IP1000-11, Руководство пользователя

Страница: 4 / 24

1
1. Important Safety Instructions
As an AC power supply equipment, the inverter's output voltage is at the same level as that
of the household power plug. Mind the AC output terminals, or you may get an electric
shock and result in life danger!
Attentions:

Connect the DC input according to the requirement strictly. The IPower inverter has a
relatively wide input range. Still, too high or too low input may cause problems even
destroy the inverter.

A reverse polarity connection will blow the fuses in the inverter and may damage the
unit.

Do not expose the inverter to a humid, flammable, explosive, or dust environment.

Keep the inverter out of children's touch.

Inverter input is recommended to connect to the battery. The minimum capacity of the
battery(expressed in AH) should be calculated in the following way: 5times of the rated
power of the inverter/battery voltage. If for testing purpose, the user should select DC
power supply current at least twice greater than that of the inverter rated input to keep
normal inverter operation. Use a DC power supply for testing may cause damage to
the inverter.

When the inverter works continuously, its surface may become very hot; please ensure
the air ventilation clearance around the inverter is more than 10cm. Keep away from
the material or device which may suffer from high temperature when the inverter is
working. Do not install the inverter in an airproof location and keep enough space
around the inverter.

The protective grounding must be connected to the ground. The cross-section of the
wire should not be less than 4mm
2
.

The wire connection between the battery and inverter should be less than 3m, and the
current density should be less than 3.5A/mm
2
. At this time, the inverter is running at full
load. If the wire length is greater than 3m, the current density should be reduced.

A fuse or breaker should be used between the battery and inverter. The value of the
fuse or breaker should be twice the inverter's rated input current.

Do not connect the battery charger or similar devices to the inverter's input terminal.

Do not put the inverter close to the flooded lead-acid battery because the terminals'
sparkle may ignite the hydrogen released by the battery.