Specifications
Material of Construction
Body
: Carbon Steel / Stainless Steel.
Bladder
: Nitrile(NBR) / Butyl (IIR) /
Viton (FKM) / EPDM ....
others listed on ordering code.
Connections
Gas Side
: 5/8” UNF / 1/4” BSP /
5/16” UNEF/Vg8 / 7/8” UNF.
Others on request.
Fluid Side
: Female Threaded or
Flanged. Others on request.
Paint-CS Accumulators : Externally painted in RAL-5010.
Others on request.
Technical Data
Design
: Seamless / Fabricated shell.
Max. Pressure (PS)
: 16-360 Bar.
Test Pressure (PT)
: 1.43 x PS
Temperature range
: -20°C to +80°C (Standard)
Allowable pre.ratio (P /P ) : 4:1
2
0
Nominal capacity
: 0.2 to 575 Ltrs.
Max. Flow rates
: Refer page 6.
Fluid
Fluid Viscosity range
: 10 to 400 cSt
Recommended viscosity : 32 cSt
Fluid contamination degree: Class 21/19/16
according to ISO 4406:1999
or better on request.
Description
A hydro-pneumatic accumulator is a device used
specifically for storage of liquid under pressure. As liquids,
for all practical purposes, are incompressible, this objective
is achieved by utilizing the compressibility of gases.
A flexible rubber separator i.e., bladder is fitted into the
accumulator shell.
An inert gas - nitrogen - is filled into the bladder through a
pressure valve to a pressure P . The bladder expands, filling
0
the entire volume V of the accumulator shell.
0
When the system pressure P is higher than the gas
1
precharge pressure P , the liquid enters the accumulator
0
and the bladder is compressed reducing the gas volume to
V .
1
Should the liquid pressure rise to P , the volume of gas
2
reduces to V with an attendant rise in pressure, thus
2
balancing the Liquid pressure.
A potential energy is now stored in the accumulator to be
utilised whenever needed.
Certification
The EPE bladder accumulators are generally designed &
manufactured according to European directive. They can
also be supplied as per ASME or others on request.
Materials
In standard version, the shell is made of carbon steel and
painted on the outside with a coat of rust inhibitor; the
valves are made from carbon steel - phosphated. This
configuration is suitable for oils and non-corrosive liquids.
Options for shell in stainless steel / aluminium / titanium
alloy are available on request.
Shells Nickle plated / Rilsan coated or others are also
available on request.
Hydraulic Symbol
1
Bladder Accumulator
Type : AS
Technical specifications subject to change.
