POWERED BY
10
SERIES
SERIES
4.
Disconnect the power supply of the device.
Using the Setup Wizard
The Setup Wizard can walk you through some important settings of thedevice.By default, the
Setup Wizard starts once the device has loaded.
Operating the Setup Wizard:
You can set the system language after the device is started. Click Apply to save the language
settings.
1. Check the checkbox to enable Setup Wizard when device starts. Click Next to continue the
setup wizard.
You can also click Cancel to exit the Setup Wizard, or use the Setup Wizard next time by
leaving the “Start wizard when device starts?” checkbox checked and exit.
2. ClickNextbutton on the Wizard window to enter the Loginwindow.
1)
Enter the admin password. By default, the password is 12345.
2)
To change the admin password, check the New Admin Password checkbox. Enter the new
password and confirm the password in the given fields.
