Epcom EPIG5K, Руководство пользователя

Страница: 24 / 33

- 22 -
6.2 Switch off
1. When solar power was not enough to generate the power, the inverter will shut
down automatically.
2. If you need to shut down yourself, you can operate the inverter through the front
panel screen.
3. The process of emergency shutdown.
If you need shut down the inverter in emergency, first turn off the AC breaker, then
turn off the DC breaker, otherwise it may lead to the damage of the DC breaker and
danger to people. If any damage or loss occurs due to not following this requirement,
(3&2032:(5/,1(
will not follow the warranty.
7
Troubleshooting
7.1 Troubleshooting of the LED indicator
Type of fault
Troubleshooting
LED indicators and LCD
cannot be lit
1. Disconnect AC circuit breaker.
2. Disconnect DC circuit breaker.
3. Check the polarity of DC input.
“RUN” indicator goes out 1. Disconnect AC circuit breaker.
2. Disconnect DC circuit breaker.
3. Check the correctness of electrical connection of inverter.
4. Check whether the voltage of DC input exceeds start-up voltage
of inverter.
5. If all above conditions are OK, please contact
6<6&20(3&20
“Fault” indicator is lit red. 1. There is a fault which is not removed yet.
2. Perform troubleshooting according to fault type in LCD screen.
See “7.2 Troubleshooting of Faults in LCD Screen”.
3. If it can’t be solved, please contact
6<6&20(3&20
.