EPAX ROPAX RPM 7700 VII, Оригинальное руководство по эксплуатации

Страница: 65 / 76

65 12. 02
To tow the Jumbo Mobile Compactor, the travel drive must be short-circuited:
1. Tilt the driver’s position (see chapter Maintenance and inspection work)
2. Undo the hexagon nuts item 2
3. Turn in the threaded bolts item 1 until they make full contact with the hexagon nut.
4. Tilt the driver’s position back and fasten it again for towing.
Only load and transport the Jumbo Mobile Compactor, when all safety requirements are met!
Only allow experienced expert personnel to carry out loading and transport! The transporter
is always responsible for loading and transport!
Danger of accidents due to improper loading! Clean the Jumbo Mobile Compactor prior
to loading and transporting of coarse dirt.
Use transport vehicles with sufficient load bearing capacity (please note the operating
weight of the Jumbo Mobile Compactor.)
Danger of accidents due to falling or slipping while loading the Jumbo Mobile Compactor.
Caution when loading and transporting snow and ice.
Danger of accidents due to improper loading! Before attaching the loading gear, secure
the articulated joint with the joint securing device as described in chapter ‘Blocking the
articulated joint’. Only use lifting equipment with sufficient load bearing capacity, which
are in perfect condition (note the operating weight of the Jumbo Mobile Compactor).
After loading onto the transport vehicle, secure the machine as described in chapter
‘Securing the Jumbo Mobile Compactor’.
12.3 The transport
12.4 Loading the Jumbo Mobile Compactor onto a transport vehicle
12.5 Loading by crane
Use the attachment points marked by labels to attach the loading gear! To do so, undo the screw
used to fasten the rear attachment eyebolts so that they can be turned.