EPAK Basic Line Series, Руководство пользователя

Страница: 8 / 34

2.7. Drillings
For an ideal mounting of the antenna we prepared all possible drilling pictures with a diameter of 2 mm in
the bottom of the radome.
Please refer to the included template for the drilling measurements (see bottom from below!). The drilling
holes have to have a size of
∅
8.5 – 9 mm for the included M8 screws. We recommend to start with
drilling a smaller hole, using a
∅
3.5 – 4 mm bit to avoid any damage to the mounting surface. To mount
the antenna, only use the included M8 mounting screws!
!! If the antenna unit is not mounted on a device carrier or separate mounting plate, close all
drilled holes with waterproof sealing material to avoid any water penetrating!
Possible dimension s:
River Line & Basic Line: 228.6 mm x 228.6 mm and 134.2 mm x 77.5 mm
For a good and steady mounting of the antenna we recommend the drilling picture 228.6 mm x 228.6
mm. For the drilling picture 134.2 mm x 77.5 mm you will find tapped holes at the bottom plate of the
antenna, so no nuts would be necessary.
Bow
English Page 8 / 34