EPAK Basic Line Series, Руководство пользователя

Страница: 18 / 34

5.2. Update of satellite data base
Example : The Astra satellite was stored with Band-Tracking in German waters. Now the vessel is sailing
in Scandinavian waters. Accordingly the elevation angles, respectively frequency data have been changed
and it takes longer to locate the satellite. To shorten the search time, new data for the angles have to be
stored:
1. To go to the Setup menu, press

repeatedly until the display shows
Setup
(flashing), then press

.
Enter password, see chapter 3.4. If the password is correct you are in the Setup menu.
2. Press

repeatedly until
UpdSat
appears. Now the up-to-date elevation angles,
respectivaly
frequency da
ta of the satellite can be stored by pressing

. Please keep in mind, that the menu item
UpdSat
is not shown, if the tracking function is deactivated (see chapter 4.1).
3. The display interchanges between
Sat X
(storage position of current satellite) and
UpDate
.
4. To cancel press

/ to confirm (if the picture quality is optimal), press

.
5. If you chose to cancel, the display shows
cancel
for a brief moment. If you chose confirm, the
display interchanges between
updating
and
checking
.
6. After the correct update , the display shows
complete
for a brief moment and the system
automatically jumps to the TV mode. If the update was not successful the display shows
ErrSave
and
the system returns to the menu item
UpdSat
. In this case, please repeat the update.
Next time the antenna is turned on, the angles and frequency data of the satellite are stored for the current
area.
5.3. Delete stored data
To delete stored satellite positions, the following steps must be completed:
1. Go to the Setup menu: press

repeatedly until the display shows
Setup
(flashing), then press

.
Enter password, see chapter 3.4. If the password is correct you are in the Setup menu.
2. The display now shows
Tracking
. Press

repeatedly until
Del Sat
appears. Press

.
!!
Del Sat
only appears if satellites are stored in the system.
3. The display shows
Sat X
, whereas X is the first satellite storage position to be deleted. To choose the
satellite to be deleted, press

and confirm with

.
4. The display interchanges between Sat X and Delete . To confirm, press

/ to cancel, press

.
5. If you chose confirm the display shows
complete
for a brief moment. If you chose cancel, the
display shows
cancel
.
6. In both cases, the display will return to
Del Sat
.
!! If no further satellites are available for deletion, the display shows
Tracking
!
If there are more satellites in the system you wish to delete, press

and repeat from point 3! If you want
to leave the menu, press

until
quit
appears and then press

. The display shows
Setup
(flashing).
N
ow you are back in the main menu and can switch to other satellites or make adjustments in the Setup
menu by pressing the

key.
English Page 18 / 34