background image

REV. 12/2020

1

C

 Battery use and maintenance

                        

                               

1.1 Safety and warning

C

1.1.1Safety regulations for handling acid batteries

The truck must be parked and rendered safe before any operations on batteries are under 

taken.

-These trucks are equipped with maintenance-free batteries. No distilled water can beadded 

 to this battery type.The cell covers are fixed tight and must not be opened. Opening the 

covers will damage the battery.

-Smoking and naked flames are not permitted when handling batteries. No inflammable 

substances or spark-generating materials must be present or stored within a distance of 2 

meters of the truck parked for battery recharging. The location must be well ventilated and fire 

fighting equipment must be kept ready.

-

Only trained and authorized personnel are permitted to charge, service and replace the 

batteries.

-Batteries are recycled in accordance with national regulations; please comply with the

 relevant regulations.

Servicing of lead-acid batteries

The lead-acid battery cell screw caps must be kept dry and clean. Terminals and cable shoes 

must be clean, lightly greased with pole grease and must be securely tightened.

Daily Maintenance

Charge the discharged battery;

Visual inspection for excessive dirtiness and mechanical damage after the charging.

Содержание EST122

























































Отзывы: