ep EST122 Скачать руководство пользователя

Страница: 34 / 56

REV. 12/2020

•

No smoke and fire!

•

Avoid the existence of

open fire, fiery metal wire

or sparks around the

storage battery, otherwise

explosion or fire disaster

may occur!

•Don’t trample on the storage

battery to prevent it from

fierce shaking or shacking!

Do not place the battery on

top of conductive objects.

• Dangerous voltage!

• Avoid hot plugging!

• Notice: the metal part of

the storage battery cell is

electrified, so don’t place any

external object or tool on the

battery cell!

Avoid the battery becoming

corroded by water or corrosive

liquid.

Keep the battery away from all

fire sources, heat sources and

flammable or explosive

materials.

In the event of accidental contact with electrolyte, the eyes shall be immediately flooded with

large quantities of water for an extended period of time. In all cases immediate medical

attention shall be obtaine

In the event of accidental skin contact with electrolyte, the affected parts shall be washed with

large quantities of water or with adequate neutralizing solutions. If irritation of skin persists

medical attention shall be obtaine.

Accidental contact, "first aid"

Acid and alkaline electrolytes create burns in eyes and on the skin.

A source of clean water, from tap or a dedicated sterile reservoir, shall be provided in the

vicinity of the battery under charging or maintenance for removing electrolyte splashed onto

body parts.

WARNING

• Abide by the operation

manual!

• All the operations related

to the storage battery must

be implemented under the

instruction of professionals!

• Always wear protective

clothing (e.g. safety

goggles and safety gloves)

when working on cells and

batteries.

•

Explosion or fire disaster is

likely to occur; avoid short

circuit!

• Don’t knock over the storage

battery!

• Using lifting and delivery

devices as specified. Prevent

the storage battery cell,

interface and connection

cable from being damaged by

the lifting hook!

Safety and warning

Содержание EST122

























































Результаты поиска

Содержание EST122

Отзывы:

Похожие инструкции для EST122

Бренды по названию

Популярные бренды

ep EST122, Руководство по эксплуатации

Результаты поиска

Содержание EST122

Отзывы:

Похожие инструкции для EST122

Бренды по названию

Популярные бренды