ep ES10-10WA, Руководство по эксплуатации

Страница: 20 / 41

15
Negotiating slopes and inclines: Negotiating slopes or inclines is only permitted if such
roads are clean and have a non-slip surface and providing such journeys are safely
undertaken in accordance with the technical specifications for the stacker in question. The
stacker must always be driven with the load unit facing uphill. The industrial stacker must not
be turned, operated at an angle or parked on inclines or slopes. Inclines must only be
negotiated at slow speed, with the driver ready to brake at any moment.
Negotiating lifts and docks : Lifts and docks must only be used if they have sufficient
capacity, are suitable for driving on and authorised for stacker traffic by the owner . The
driver must satisfy himself of the above before entering these areas. The stacker must enter
lifts with the load in front and must take up a position which does not allow it to come into
contact with the walls of the lift shaft.
Persons riding in the lift with the stacker must only enter the lift after the stacker has come to a
rest and must leave the lift before the stacker.
Nature of loads to be carried: The operator must make sure that the load is in a
satisfactory condition. Only carry loads that are positioned safely and carefully. Use suitable
precautions, e.g. a load guard, to prevent parts of the load from tipping or falling down.
4.2 Travelling, Steering, Braking
Never carry passengers.
Emergency Stop
press the Emergency Stop button(1)
。
All electrical functions are deactivated.
Automatic braking
Automatic braking occurs when the tiller is released – the tiller automatically sets itself to the
upper brake zone (B).
If the tiller moves slowly to the upper brake zone, the cause of this fault must be rectified. If
necessary, replace the gas pressure spring.