EP Equipment EPT18-EHJ, Руководство по эксплуатации

Страница: 58 / 59

REV. 08/2019
9
G
Safety checks to be performed at regular intervals and following any unusual
incidents
Carry out a safety check in accordance with national regulations. EP has a special safety depart-
ment with trained personnel to carry out such checks.
The truck must be inspected at least annually (refer to national regulations) or after any unusual
event by a qualified inspector. The inspector shall assess the condition of the truck from purely
a safety viewpoint, without regard to operational or economic circumstances. The inspector shall
be sufficiently instructed and experienced to be able to assess the condition of the truck and
the effectiveness of the safety mechanisms based on the technical regulations and principles
governing the inspection of forklift trucks.
A thorough test of the truck must be undertaken with regard to its technical condition from a
safety aspect. The truck must also be examined for damage caused by possible improper use.
A test report shall be provided. The test results must be kept for at least the next 2 inspections.
The owner is responsible for ensuring that faults are immediately rectified.
A test plate is attached to the truck as proof that it has passed the safety inspection.This plate
indicates the due date for the next inspection.
Final decommissioning, disposal
Final, proper decommissioning or disposal of the truck must be performed in accordance with
the regulations of the country of application. In particular, regulations governing the disposal of
batteries, fuels, Hydraulic oil, plastic and electronic and electrical systems must be observed.
Any repairs or maintenance to the truck must be performed only by trained and authorized
technicians.
Tire replacement
The quality of tyres affects the stability and performance of the truck. When replacing tyres
fitted at the factory, only use the manufacturer’s original spare parts. Otherwise the data sheet
specifications of the truck cannot be guaranteed. When changing wheels and tyres, ensure that
the truck does not slew (e.g. when replacing wheels always left and right simultaneously).
Only original tires have been certified by our quality assurance service. To ensure safe and
reliable operation of the fork truck, only tires of the manufacturer must be used.
i
NOTE
1.7
WARNING
1.6
1.5