EP Equipment EPT18-EHJ, Руководство по эксплуатации

Страница: 34 / 59

REV. 08/2019
4 E
Take care not to disturb any adjacent loads, or those which may be to the side or in front
of the load being handled.Loads should be laid out as follows:
Line up loads with a small space between each one and its neighbour to avoid any
fouling.
CAUTION
Only transport loads that have been positioned and secured in accordance with regulations.
Take appropriate protective measures if the load is at risk of tipping over or falling during
transport.
Unloading
Carefully drive the truck to the desired location.
Carefully drive the truck to the unloading area.
Lower the load until the fork arms are free from
the pallet.
Back the truck away in a straight line.
Raise the forks to mid-height.
R V
Approach the load carefully.
Adjust the height of the forks until they can be
easily inserted into the pallet.Insert the forks
under the load.If the load is shorter than the
forks, position the forks so that the front of the
load overhangs them by a few centimeters, to
avoid interference withthe load immediately
ahead.Raise the load a few centimeters above
its support. Back the truck away from the stack
or any neighbouring loads, gently and in a
straight line.Transporting loads Always carry
loads in the forward direction of travel (R) in
order to have the best visibility.
When carrying a load on a slope, always
ascend or descend with the load uphill.Never
drive sideways across a slope or perform a
U-turn. Reverse travel (V) is to be used solely
for unloading.Since visibility is reduced when
travelling in thisdirection, drive only at very
slow speed.