EP Equipment EPL153, Руководство по эксплуатации

Страница: 8 / 48

REV. 10/2019
2 A
Intended use
The truck is designed for transporting and stacking the loads indicated in the load capacity
diagram. Especially:
In accordance with the safety rules of your industry association
Other local regulations
In all cases, the people in charge, particularly operators and service personnel, must comply with
the specific approved rules for the use of industrial trucks.
The user, and not the manufacturer EP, is liable for any hazards caused by any application not
authorised by the truck manufacturer.
Please contact your authorised dealer if you want to use the truck for an application that is not
specified in this manual.
The truck must not be altered, especially by making modifications or installing attachments,
without the manufacturer's approval.
Improper use
The operating company or driver, and not the manufacturer, is liable if the truck is used in a
manner that is not permitted.One of the main causes of accidents is the driver ignoring or being
unaware of the basic safe operating practices of the truck.
The following basic safe operating practices must be observed to ensure the safety of operators
and others.Never operate the truck in environments with s potentially explosive atmosphere.
Never carry passengers.
Do not overload the truck. (by exceeding the rated load indicated on the load designation plate)
Overloading can affect braking distances, truck stability and the strength of the lift mast.
Do not pick up an off-centre load.
Do not stack loads or turn when driving on a ramp.
Do not operate the truck on loose or greasy surfaces.
Do not drive on uneven or obstructed surfaces. Never park the truck in a place that may obstruct
fire extinguishers, fire escapes or aisles.
Do not dismount from the truck while it is moving.
Do not leave the truck unattended when the load is raised.
Never leave the vehicle unattended on a ramp. When driving, do not place any part of your body
outside the confines of the truck, lean on the edge of the truck or attempt to jump onto another
truck or object.
Do not use the forks or any other part of the truck to push, pull or support items, unless the design
permits this.
•
•
•
•
•
•
•
•
•
•
•
•
•