EP Equipment EPL153, Руководство по эксплуатации

Страница: 27 / 48

REV. 10/2019
4 E
CAUTION
Only transport loads that have been positioned and secured in accordance with regulations.
Take appropriate protective measures if the load is at risk of tipping over or falling during
transport.
R
V
Approach the load carefully.
Adjust the height of the forks until they can be easily inserted into the pallet. Insert the forks
under the load. If the load is shorter than the forks, position the forks so that the front of the
load overhangs them by a few centimeters, to avoid interference with the load immediately
ahead. Raise the load a few centimeters above
its support. Back the truck away from the stack or any neighbouring loads, gently and in a
straight line. Transporting loads Always carry loads in the forward direction of travel (R) in
order to have the best visibility.
When carrying a load on a slope, always ascend or descend with the load uphill. Never drive
sideways across a slope or perform a U-turn. Reverse travel (V) is to be used solely for
unloading. Since visibility is reduced when travelling in this direction, drive only at very slow
speed.
Take care not to disturb any adjacent loads, or those which may be to the side or in front of
the load being handled. Loads should be laid out as follows:
Line up loads with a small space between each one and its neighbour to avoid any fouling.