Operation guide
05
06
Note: This button can not prevent all accidents.
④
Speed/direction control knob
3. Battery indicator
Discharging status of battery is indicated on battery indicator with ten indicator bars for each 10% increase. On
the bottom, the truck's working hour can be displayed.
①
Battery cover
Opening the battery cover facilitates the checking of the charger, replacement of the battery or accessing to
charging socket.
②
Battery replacement
Open the battery cover, tie the sling to the lifting point at the ends of the battery, lift and then move the battery
transversely.
5
．
Vehicle check
Please check the vehicle works properly before using it, the vehicle can only be used after its safety is ensured.
If abnormal or damaged parts found, please stop using it immediately and report the problem to management
personnel.
Make sure the battery is fully charged, the electrolyte level is normal and its vent is smooth. No smoking and
lighting of fire on site.
Check the wheel is installed firmly.
Check whether the fork arms are bent, cracked or worn.
Check whether the lifting chain is worn.
If the load restrainer is selected and bought, ensure it is installed in place.
Check if the oil leaks on the bottom of the vehicle.
Press the horn to check its sound.
Ensure the cut-out is normal.
Check that all controllers are normal.
Forward
③
Belly switch
Emergency reverse driving function: Belly switch reverses the direction of the truck upon contact with the body
of the operator during the backward travel, to avoid injury to operator.
One knob is equipped on each side of the control handle, used for controlling the direction and speed of the vehicle.
Gradually rotate the knob forward, the vehicle moves forward. rotate the knob backward, the vehicle moves
backward. Travel speed is related to the margin of the rotation of the knob: the larger the margin, the higher the
speed, but the relation is not linear.
Note: the button will return to neutral when released, then the vehicle will be braked. To move forward, do
not release the button.
Reverse
⑤
Raise and lower button
Raise button and lower button is located in the front of the upper part of the control handle. Press the raise
button to lift the fork arms, press the lower button to lower the fork arms.
⑥
Creep speed button
When the operator simultaneously presses the creep speed button and the speed/direction control knob, the vehicle
moves slowly, and suitable for travel in the confined areas.
Sufficient
Charge required
Insufficient
4. Battery
Note: Be careful to prevent fingers from being pinched!
Note: after replacing the battery, pay attention to separate the cable, wire and sockets. Do not damage
the wire and cable.
①
Carry out a thorough safety check before using the vehicle each time
②
Test the vehicle in open areas
Note: If any abnormality is found in the vehicle, please stop using it immediately.
T12 Series Electric Stackers
Operation guide
Test all hydraulic functions are normal.
Check its steering.
Drive the vehicle forward and backward slowly.
Drive the vehicle forward and backward at full speed.
Check the braking distance under forward and reverse travel, the distance is affected by cargo load
and road conditions.
Understand the braking distance before using the vehicle. If the distance is too long, please stop using
it.
