background image

24

7

Tightening torque table of bolts

Unit: N.m

Grade

6

8

10

12

14

16

18

20

22

24

27

4.6

4—5

10—12

20—25

35—44

54—69

88—108

118—147

167—206

225—284

294—370

441—519

5.6

5—7

12—15

25—31

44—54

69—88

108—137

147—186

206—265

284—343

370—441

539—686

6.6

6—8

14—18

29—39

49—64

83—98

27—157

176—216

245—314

343—431

441—539

637—784

8.6

9—12

22—29

44—58

76—107

121—162

189—252

260—347

369—492

502—669

638—850

933—1244

8

Hydraulic oil and lubricating oil or grease

23

8

1.5

Transport

9

Handling of pallet stacker

The truck is only used for material handling, can not be used as a tool for long-distance transport. 
The truck must be transported by ship, train or automobile.

Transport with a crane

Thread the steel wire rope through both sides of external mast crossgirder and the bottom of the vehicle, 
then use a crane to handle the truck.

Sling and crane must have enough capacity. Never stand under the truck when lifting it.

Maintenance

Bolt diameter

Oil Name

Hydraulic oil

Gear oil

Yellow Vaseline

Lubricating grease

Trademark, code

L—HM46

GL-5 85W/90

2#

ZG2# or 3#

Capacity (L)

Remarks

Battery electrode

Warning

T12 Series Electric  Stackers

Maintenance

Содержание T12



















Отзывы: