EOS Vitae Protect, Инструкция по сборке и эксплуатации

Страница: 17 / 20

17
EN
front sight
cutout of the wall
Caution!
Remove the transport stabilisers from the Vi-
tae- emitter, loosening the covering grille.
• Device de-energized
• Remove the grille
• 6 Loosen retaining clips, remove disc
• Remove the foamed pad.
• Take care that the Vitae-emitter does not be
demaged.
950
~200
940
178
167
693
~60
Fig. 1
Abb. 2
Assembly
Fig. 3
For a too long time looking in the
emitter, your eyes can be demaged.
Please use in this case suitable protective
glasses.
safety distance
The emitter should be assembled in such a way
as to ensure that the body of the frequenter ra-
diates over as large an area as possible.
Assembly in the four corners of the infrared
booth is recommended.
Recommended radiation distance between a
person and the infrared emitter: ~30 cm (Fig. 3)
For assembly, a right-angled opening must be
fitted vertically into the wood.
This opening is filled out horizontally for the
net emitter.
The emitter can then be assembled with the
enclosed chipboard screws (see Fig. 5 and 6).