manualshive.com logo in svg

EOS P 396, Руководство по обучению

Поделиться
Скачать
EOS P 396 Скачать руководство пользователя страница 24

2

Laser sintering process

2.4

Training manual • Basic training • Status 03.14

EOS P 396

With an excessively high building temperature, in the worst case all the plastic 

powder in the building area may melt. Even before this situation is reached, soiling 

of the recoater blades, recoating with stripes and the tearing out of parts will occur. 

The building temperature should be decreased in steps until the effects no longer 

occur.

An indicator for the optimal building temperature is the consistency of the 

plastic powder in the cooled exchangeable frame and during the unpacking of 

the parts.
Using your finger press several points on the surface of the bed of powder.

The surface of the bed of powder must not be solidified. The consistency of the 

plastic powder should be loose and not baked. 
If the parts can only be unpacked with difficulty due to the strongly adhering 

powder, this situation is indicative of an excessively high building temperature.

Содержание P 396











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды