Rev_A
P a g e
5 | 9
5
2.1 Required Tools
For ease of installation, the EOS-500 is partially pre-assembled. Some minor assembly is required. The
included mounting hardware makes the installation easy and quick. The tools required for the
installation:
-
Regular (-) screw driver
-
Wrench (12mm or 1/2”)
2.2. Pre-assembly of the Wind vane.
For the ease of shipping of your station, the Wind vane and the Anemometer cups have been removed.
-
Line up the arrow on the top shaft with the “N” on the housing.
-
Gently push the wind vane onto the shaft with the point aligned to the “N”
-
Ensure that the vane is properly seated on the shaft.
-
Secure the vane by tightening the point of the wind vane.
o
DON’T OVERTIGHTEN THIS !
