36
GB
Attention:
The temperature selection of these
mode: only in the Finnish operation.
P 3
1
0
0
20:03
00:30
20:03
01:58
Once the heating cycle ends, the unit au-
tomatically starts the reheating program
to dry out the cabin. The steam symbol
disappears and the operation symbol
begins to blink.
The display now alternates between the time
of day and the remaining reheating time.
Once the reheating cycle is over, the control
unit shuts down the system automatically.
Switching back to Finnish Operati-
on
Press
„MODE“
key.
Now press
„ „
key until
P3
is shown on
the display.
Confi rm with
„Mode“
key
The humidity operation can be deactivated
with the
„ „
button.
Please confirm with a long press on the
„Mode“
button until the new value is fl ashing
on the display.
Afterwards the displays shows
„P3“
for
short time.
Switching during humidity operati-
on
If you wish to switch to Finnish operation
from steam operation, press the
„ „
and
„ „
. buttons simultaneously. The unit now
switches to Finnish operation with the preset
temperature. The oven now heats in all three
phases until the remaining heating time runs
out, which can be seen by the symbol.
Again, the display alternates with the time
of day.
Once the heating time is over, the unit shuts
down the sauna system automatically.
In the case of re-start the unit is started in
humidity operation using the parameters
last set.
